Bosch dishwasher repair in Kansas City

What goes wrong with Bosch dishwashers

E15 and a machine that will not stop draining

Water has reached the base pan and lifted a polystyrene float, so the control locks into a protective drain. The leak is usually the sump seal or the drain hose cuff, and the pan has to be dried before the code clears.

E24 and E25 drain faults

E24 points at the path out of the machine - a kinked hose, a missing high loop, or an unopened disposer plug. E25 means the pump itself is blocked. Its cover twists off in the sump, usually with glass or a seed under it.

Cloudy film and poor drying together

When that heater in the pump housing fails, the final rinse never gets hot and everything comes out wet and chalky at once. The heater is part of the circulation pump assembly, not a standalone element swap.

Door dropping open

Bosch doors are balanced by cables running over drums on each side to springs under the tub. A snapped cable makes the door slam down. Both sides get replaced so the door stays balanced.

Before you call

Wet plastic containers are not a fault here - condensation drying only works on items that hold heat, and plastic does not. Use rinse aid and crack the door at the end of the cycle.

Pricing

$175 to $300 for most dishwasher repairs including parts and labor. The $109 diagnostic is credited to the repair when you approve the written quote.

General symptoms and what each usually means are in our dishwasher repair guide. More on the brand: Bosch appliance repair.