Miele dishwasher repair in Kansas City

What goes wrong with Miele dishwashers

Won't fill, pump keeps running

The program starts, you hear draining, no water arrives. That is the waterproof system latched after finding moisture in the base pan. The pan must be dried and the source found, often a weeping door seal or an overfilled salt reservoir.

Cloudy film on glassware

Glasses come out hazy and the haze doesn't wipe off. On a softener-equipped machine the salt reservoir has run empty, or the hardness was never programmed to match the incoming water. Correcting both clears it within a few cycles.

Standing water over the filter

The cycle ends with an inch of water in the sump. The drain pump impeller jams on a shard or seed, or the non-return flap sticks and lets water back in. The filter cylinder lifts out to reach it.

Long cycles washing cold

The program stretches past its usual time and dishes come out greasy. The flow-through heater, or the circulation pump it is built into, has degraded so the machine waits for a temperature it can't reach.

Before you call

Use only coarse dishwasher salt, never table salt, and fill until the salt light goes out. Water here is hard enough that an unfilled softener ruins glassware long before anything breaks.

Pricing

$175 to $300 for most dishwasher repairs including parts and labor. The $109 diagnostic is credited to the repair when you approve the written quote.

General symptoms and what each usually means are in our dishwasher repair guide. More on the brand: Miele appliance repair.